Product | Description |
![]() |
Uni Micrometer The tips on the anvil side are interchangeable. Interchangeable anvils are available. |
![]() |
Non Rotating Spindle Type Blade Micrometer Both measuring faces are blade-shaped. Optimal for measurement of arrow grooves etc. |
![]() |
Spherical and Cylindrical Anvil Type Micrometer Provided with various rod-shape anvils. |
![]() |
Spherical Anvil and Spindle Type Micrometer Both measuring faces are spherical shaped. |
![]() |
Spherical-flat Anvil Type Micrometer The measuring face on the anvil side is spherical shaped. |
![]() |
Crimp Height Micrometer Measuring face shape dedicated to measuring the crimp height of solderless terminals. |
![]() |
Point Micrometer Both measuring faces are taper-shaped. Convenient for measuring fine parts. |
![]() |
Can Seam Micrometer Dedicated to measuring the edge height etc. of can seams. |
![]() |
Wire Micrometer The measuring faces are shaped to be convenient for measuring wire diameters. |
![]() |
Hub Micrometer Dedicated to measuring the length and thickness of steps in a pipe. |
![]() |
Non Rotating Spindle Type Tooth Thickness Micrometer Measures the “root tangent length” of gears. Compatible modules differ depending on the model. |
![]() |
Ball Anvil Type Gear Micrometer Used for “over-pin diameter measurement” of gears A ball anvil is selected according to the gear. |
![]() |
Groove Micrometer Micrometer dedicated to groove width measurement |
![]() |
Indicating Micrometer An anvil displacement is displayed on the indicator. Optimal for measurement of large item small scale production parts on shop floors. |
![]() |
Limit Micrometer Used as a limit gage with two micrometer heads. |
![]() |
Non Rotating Spindle/Interchangeable Type Universal Micrometer Supports measurement of various shapes with 7 types of interchangeable anvils. An anvil dedicated to screw threads is also available. |
![]() |
Caliper Type Outside Micrometer The standard type can measure a part to which the anvil may not access. |
![]() |
Tooth Thickness Micrometer Measures the “root tangent length” of gears. Compatible modules differ depending on the model. |
![]() |
Dial Type Sheet Metal Micrometer Easy reading structure that allows measurement read from the ratchet side Convenient for steel sheet measurement. |
![]() |
U-shape Frame Sheet Metal Micrometer U-shape frame micrometer used for measuring steel sheets |
![]() |
Non Rotating Spindle Type Paper Micrometer Micrometer dedicated to measuring paper thickness Anvil diameter: 14.3mm |
![]() |
Snap Meter Optimal for continuous measurement of mass production parts |
![]() |
Snap Meter with External Indicator Optimal for continuous measurement of mass production parts The indicator can be selected for any model. |
![]() |
Small Hole Gage Comparison measuring tool for inside diameter groove width etc. Measuring range: 3 to 13mm with 4 models |
![]() |
Spline Micrometer Both measuring faces are slimed. Convenient for measuring round groove diameter etc. |
![]() |
Telescoping Gage Comparison measuring tool for inside diameter groove width etc. Measuring range: 8 to 150mm with 6 models |
![]() |
Interchangeable Tip Type Screw Thread Micrometer For measurement of the pitch diameter of thread Interchangeable anvils depending on the screw shape |
![]() |
Fixed Anvil Type Screw Thread Micrometer For measurement of the pitch diameter of thread Fixed anvil |
![]() |
V-anvil Micrometer Measures the diameter of cylinders that have odd-numbered flutes. Convenient for measuring taps‚ reamers‚ etc.‚ with odd-numbered flutes. |